18 Years Factory Shantui Dozer - XCMG Rotary Drilling Rig XR180D – Chengong
18 Years Factory Shantui Dozer - XCMG Rotary Drilling Rig XR180D – Chengong Detail:
Detailed configuration
Adopt imported Cummins turbocharging engine ,
CE standard .Centralized lubricating system .
Advantages
XCMG XR180D Rotary Drilling Rig widely used in boring operation of bored concrete pile in foundation engineering of highway, railways, bridges, ports, docks and high-rise buildings.
1. Hydraulic telescopic (TDP series) track chassis and large diameter of slewing bearing which is special for rotary drilling rig is used, and meets super strong stability and convenience of transportation.
2. The original imported electronic-controlled turbocharged engine is used with strong power, and the emission meets North America Tier 4 Final, Europe stageⅣ emission standard.
3. German hydraulic system is used, and for which the positive flow control, load sensing control and power limit control is used to make the hydraulic system more energy efficient.
4. Single row of rope and master winch is used to solve effectively the wear issue of steel wire rope and increase effectively the service life of steel wire rope; and the master winch is provided with drilling depth detector, and the single row of rope makes the depth detection more accurate.
5. Anti-noise cab with FOPS function, adjustable seat, air conditioner, interior and exterior lights, windshield wiper with water spray function. Control console with various instruments and handles, color LCD with powerful function.
Parameters
| Project | Unit | Parameter |
| Max.Drilling Diameter | ||
| Uncased | (mm) | φ1800 |
| Cased | (mm) | φ1500 |
| Max.Drilling Depth | (m) | 60 |
| Dimension | ||
| Working condition L × W × H | (mm) | 8350×4200×20480 |
| Transportation condition L × W × H | (mm) | 14255×2960×3450 |
| Overall Drilling Weight | (t) | 56 |
| Engine | ||
| Model | - | CUMMINS QSB6.7-C260 |
| Rated Power | (kW) | 194/2200 |
| Hydraulic System | ||
| Working pressure | (MPa) | 35 |
| Rotary Drive | ||
| Max. output torque | (kN.m) | 180 |
| Rotary speed | (r/min) | 7~27 |
| Spin off speed | (r/min) | 102 |
| Pull-Down Cylinder | ||
| Max.pull-down piston push | (kN) | 160 |
| Max.pull-down piston pull | (kN) | 180 |
| Max.pull-down piston stroke | (mm) | 5000 |
| Crowd Winch | ||
| Max.pull-down piston push | (kN) | - |
| Max.pull-down piston pull | (kN) | - |
| Max. pull-down piston stroke | (mm) | - |
| Main Winch | ||
| Max.pulling force | (kN) | 180 |
| Max. single-rope speed | (m/min) | 65 |
| Diameter of the steel wire rope | (mm) | 28 |
| Auxiliary Winch | ||
| Max. Pulling force | (kN) | 50 |
| Max. single-rope speed | (m/min) | 70 |
| Diameter of the steel wire rope | (mm) | 16 |
| Drilling mast | ||
| Left/right inclination of mast | (°) | 42432 |
| Front inclination of mast | (°) | 5 |
| Rotary table slewing angle | (°) | 360 |
| Traveling | ||
| Max. traveling speed | (km/h) | 2.3 |
| Max.grade ability | (%) | 35 |
| Crawler | ||
| Track shoe width | (mm) | 700 |
| Distance between tracks | (mm) | 2960~4200 |
| The length of crawler | (mm) | 5140 |
| Average ground pressure | (kPa) | 93.6 |
Product detail pictures:
Related Product Guide:
Our focus on should be to consolidate and enhance the quality and repair of present products, in the meantime constantly establish new products to meet unique customers' requires for 18 Years Factory Shantui Dozer - XCMG Rotary Drilling Rig XR180D – Chengong , The product will supply to all over the world, such as: Myanmar, Jersey, South Africa, At Present, our merchandise have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
By Eleanore from Swedish - 2017.05.21 12:31
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Olive from USA - 2018.12.10 19:03
