Hot Sale XCMG GR165 Mini Motor Grader With 3660mm Blade

Short Description:

Main parameters:

Operating weight :15 tons

Moldboard : 3965*610mm

 

Detailed configuration

* Cumm engine

* Meritor driving axle

* Air Conditioner driving cabin

* Imported differential mechanism


Product Detail

Product Tags

Advantages

Strong power ,Comfortable driving environment .

Adopt imported hydraulic parts .Great working performance .

 

XCMG Motor grader GR165 is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

 

* The GR165 adopts 6BTA5.9-C180-II turbocharged diesel engine, which has large output torque and power reserve coefficient and low fuel consumption.

* The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.

* Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.

* The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.

* The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.

Optional Parts

* Front mouldboard

* Rear scarifier

* Shovel blade

Parameters

Basic specification
Engine model 6BTA5.9
Rated power/speed 130kW/2200rpm
Dimension(LxWxH) 8900*2625*3420mm
Operating weight(Standard) 15000kg
Performance specification
Travelling speed ,forward 5811192338 km/h
Travelling speed ,reverse 51123 km/h
Tractive force(f=0.75) 77KN
Max. gradeability 25%
Tire inflation pressure 260 kPa
Working hydraulic pressure 16 MPa
Transmission pressure 1.31.8MPa
Operating specification
Max. steering angle of front wheels ±50°
Max. lean angle of front wheels ±17°
Max. oscillation angle of front axle ±15°
Max. oscillation angle of balance box ±15°
Frame articulation angle ±27°
Min. turning radius using articulation 7.3m
Blade
Maximum lift above ground 450mm
Maximum depth of cutting 500mm
Maximum blade position angle 90°
Blade cutting angle 28°—70°
Circle reversing rotation 360°
Moldboard width * height 3965*610mm

  • Previous:
  • Next:

  • Write your message here and send it to us