Offical Brand XCMG 100hp Mini Motor Grader Model GR100 Price

Short Description:

Main parameters:

Operating weight :7 tons

Moldboard : 3048*500mm

 

Detailed configuration

* 4BT3.9 engine

* XCM G driving axle

* air conditioner driving cabin

* Imported differential mechanism


Product Detail

Product Tags

Advantages

Strong power ,Comfortable driving environment .

Adopt imported hydraulic parts .Great working performance .

XCMG GR100 is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

Advantages :

* GR100 adopts Dongfeng Cumm 4BTA3.9-C100-II (SO11847) turbocharged diesel engine with large output torque and power reserve coefficient and low fuel consumption.

* The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.

* The drive axle is a dedicated XCM G axle.

* Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.

* The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.

* The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.

Optional Parts

* Front mouldboard

* Rear scarifier

* Shovel blade

Parameters

Basic specification
Engine model 4BT3.9
Rated power/speed 75/2400kw/rpm
Dimension(LxWxH) 6880×2375×3150mm
Operating weight(Standard) 7000kg
Performance specification
Travelling speed ,forward 5102039km/h
Travelling speed ,reverse 825km/h
Tractive force(f=0.75) 41.6KN
Max. gradeability 20%
Tire inflation pressure 350KPa
Working hydraulic pressure 16MPa
Transmission pressure 1.31.8MPa
Operating specification
Max. steering angle of front wheels ±50°
Max. lean angle of front wheels 17°
Max. oscillation angle of front axle ±15°
Max. oscillation angle of balance box  
Frame articulation angle ±27°
Min. turning radius using articulation 5.9m
Blade
Maximum lift above ground 300mm
Maximum depth of cutting 350mm
Maximum blade position angle 45°
Blade cutting angle 28°—70°
Circle reversing rotation 120°
Moldboard width X height 3048×500mm

  • Previous:
  • Next:

  • Write your message here and send it to us